fsh 99GETNOW6

jcpenney.com | JCPenney Home™ Saratoga Cut-to-Width Fringed Blackout Roller Shade - FREE SWATCH

JCPenney Home™ Saratoga Cut-to-Width Fringed Blackout Roller Shade - FREE SWATCH

web ID: 7360404
select a product

Saratoga cut--to-width blackout shade features a light-blocking layer sandwiched between two layers of vinyl for privacy and light control. Note: Roller shades will be slightly narrower than the width ordered; to avoid the resulting light gap on each side and to achieve maximum privacy and light control, consider outside mount.

  • cordless product safe for homes with young children and pets
  • cut to the exact width you need from 15" to 73¼" wide
  • embossed vinyl with the look of fabric
  • fringed bottom hem
  • white on street side except ivory which is the same color on both sides
  • heavy-duty spring roller mechanism allows you to adjust shade to any height

Fits windows up to 64" long. Inside or outside casing installation. Window must be at least ¾" deep for inside mount, 2¼" deep for flush inside mount. Mounting hardware and instructions included. Shades wipe clean with a damp cloth. Imported.

To Order: You will be able to specify the exact width you need for your shade. For inside mount, subtract 1/8" from your overall width to account for mounting brackets.

Note: If you are ordering more than one shade within the same size range and want the shades cut to different widths, you must place each shade in the shopping bag separately.

Spring motor roller shades are manufactured with approximately 8” of extra fabric added to the length. This is required for the proper operation of the spring activated roller mechanism.

FREE SWATCH: If you would like to receive a swatch of the fabric prior to ordering the item, please e-mail customerservice@phaseii.com to receive a sample swatch of fabric. Please include your name, address, item description and color that corresponds with your selection. Allow 5 days to receive the swatch.

*Cost savings represent the relative cost of heating or cooling an area to account for heat lost or gained through a window. Savings reflect comparison to a bare single-pane window. Energy Savings logo developed by JCPenney for exclusive use. Energy Savings testing conducted by an independent third-party laboratory.

  • bvseo_sdk, java_sdk, bvseo-
  • getReviews, method:CLOUD, 500ms
  • bvseo-msg: Execution timed out, exceeded 500ms;

will these curl at edges after installed or will they hang flat and straight from top to bottom?

I will be hanging these blinds on 3 adjoining windows. right and left window sections are 23.5 wide and center section is 43 inches wide. ( I will purchase 3 shades) I will be utilizing the full length of these shades when they are pulled down in down position to close.
Asked by: serendipity
I have a blind just like this one and it did not curl at the edges. My hangs flat and straight. I love it.
Answered by: anita
Date published: 2016-10-04

Can I trim width myself?

Mine arrived about 1/4 to 1/2 inch too wide. Will the tube slide down, if I trim myself? If not, I'll have to return them.
Asked by: Ellen
WOW a half an inch is quite a bit. I think mine were probably a quarter of an inch to wide and I hit (carefully) the flat round silver part (NOT the pointed tips) on each end with a hammer. Pushed them in just enough to work. Hope you don't have to go through returning yours. Good luck.
Answered by: Seaside
Date published: 2017-01-14

For Inside Mount, if inside of window is exactly 23-1/2" do I supply this number or subtract 1/8" and use new no.?

Asked by: serendipity
I believe that you measure the window and then they figure it out
Answered by: momshopsforblinds
Date published: 2016-06-18

I the measurement the fabric, the roller, or the tips distance?

Asked by: Robinski
measure the inside distance. Subtract 1/8" & order that size. If ordering more than one blind label the window with a piece of masking tape & measurement so you know which blind goes in which window.
Answered by: Jams
Date published: 2016-10-03

size of fabric

If I measure the width from tip to tip of the roller to be 23 and 5/8, how much shorter is the fabric itself?
Asked by: Terri
Just measured mine-fabric is 1 inch shorter on each side. Keep in mind one side is spring loaded so you can order a little wider (about 1/2 inch)
Answered by: Anonymous
Date published: 2017-01-07
  • y_2017, m_2, d_20, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_en_US, sid_13cab12, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_jcpenney
  • bvseo_sdk, java_sdk, bvseo-
  • getContent, method:CLOUD, 44ms
4.05 194