ILIA True Skin Radiant Priming Serum

What it is: A clean, silicone-free, ultra-breathable primer that protects against harmful environmental stressors and preps skin for seamless makeup application.

Highlighted Ingredients:
- Beta Glucan: Helps to reduce the appearance of fine lines and wrinkles.
- Hibiscus: Helps to protect against free-radical damage.
- Mastic: Helps to mattify and refine skin throughout the day.

Ingredient Callouts: Free of sulfates SLS and SLES, parabens, formaldehydes, formaldehyde-releasing agents, phthalates, mineral oil, retinyl palmitate, oxybenzone, coal tar, hydroquinone, triclosan, and triclocarban, and contains less than one percent of synthetic fragrances. This product is also vegan, cruelty-free, and gluten-free, and comes in recyclable packaging.

What Else You Need to Know: This silicone-free, fragrance-free primer preps skin for smooth application, while providing a natural barrier against pollution�providing a not-so-basic base. Its silky texture transforms on contact to a give visibly tightening effect: firming the look of skin and refining the appearance pores and fine lines, while leaving skin radiant.

Suggested Usage:
-Shake well before use.
-Prep your skin with three to four drops of True Skin Radiant Priming Serum after moisturizer and before makeup.
-Apply with your fingers as you would a serum and pat into skin.
-Observe the tightening effect on skin as the primer transforms to a silky soft-to-the-touch finish on dry down.
-Allow one to two minutes for the primer to set, then proceed with seamless makeup application. -

Size:
1 fl oz/ 30 ml

Ingredients:
-Hibiscus Extract: Helps to protect against free radical damage.
-Mastic: Helps to mattify the look of skin throughout the day.
-Beta-Glucan: Helps to reduce the appearance of fine lines and wrinkles.

Aloe Barbadensis Leaf Juice*, Maltose*, Gluconolactone, Glycerin, Caprylyl/Capryl Glucoside, Propanediol, Sodium Benzoate, Caprylic/Capric Triglyceride, Agave Tequilana Leaf Extract*, Xanthan Gum, Chondrus Crispus Extract*, Pistacia Lentiscus (Mastic) Gum*, Hydrogenated Lecithin, Mica*, Calcium Gluconate, Benzyl Alcohol, Ethylhexylglycerin, Lithothamnion Calcareum Extract*, Beta- Glucan*, Caprylyl Glycol, 1,2-Hexanediol, Citric Acid, Sodium Hydroxide, Benzoic Acid, Phenethyl Alcohol, Dehydroacetic Acid, Hibiscus Sabdariffa Flower Extract*, Potassium Sorbate, Titanium Dioxide (Ci 77891)*.

Clean at Sephora products are formulated without:
Sulfates�SLS + SLES, Parabens, Formaldehydes, Formaldehyde-releasing agents, Phthalates, Mineral Oil, Retinyl Palmitate, Oxybenzone, Coal Tar, Hydroquinone, Triclosan, Triclocarban, Undisclosed synthetic fragrances (Products can be formulated with disclosed synthetic fragrances that meet the following two criteria: (1) the synthetic fragrances do not include any of the ingredients listed in numbers 1 through 12 above and (2) the synthetic fragrances are at a concentration below 1% of the total formula) The following type of acrylates: (ethyl acrylate, ethyl methacrylate, methyl methacrylate, butyl methacrylate, hydroxypropyl methacrylate, tetrahydrofurfuryl methacrylate, trimethylolpropane trimethacrylate , aluminum salts), Animal Oils/Musks/Fats, Benzophenone + Related Compounds, Butoxyethanol, Carbon Black, Lead/Lead Acetate, Methyl Cellosolve + Methoxyethanol, Methylchloroisothiazolinone & Methylisothiazolinone, Mercury + Mercury Compounds (Thimerisol), Insoluble Plastic Microbeads (This prohibited ingredient applies to products that are meant to be rinsed off ), Resorcinol, Talc (Talc that is free of any asbestos can be used in the formulation provided that Brand conducts testing to ensure that talc is free of any asbestos.), Toluene, Butylated hydroxyanisole (BHA), Butylated hydroxytoluene (BHT) that is 0.1% or more of total formula, Ethanolamines DEA/TEA/MEA/ETA, Nanoparticles as defined by the European Commission, Petrolatum and Parrafin that is not USP grade, Phenoxyethanol that is 1% or more of total formulation, Polyacrylamide & Acrylamide, The following types of Styrene (Bromostyrene, Deastyrene/acrylates/dvbcopolymer, sodium styrene/divinylbenzene copolymer , styrene oxide, styrene), 1,4 Dioxane in final formulas must comply with the thresholds as follows: (10 or < ppm for products that are meant to be rinsed off, wiped off or removed, 3ppm or < for products that are meant to remain on the skin).

Clean at Sephora
Clean at Sephora is formulated without a list of over 50 ingredients,
including sulfates (SLS and SLES), parabens, phthalates, and more. For the full
list, check out the Ingredients below.

Clean at Sephora products are formulated without:
Sulfates—SLS + SLES, Parabens, Formaldehydes,
Formaldehyde-releasing agents, Phthalates, Mineral Oil, Retinyl Palmitate,
Oxybenzone, Coal Tar, Hydroquinone, Triclosan, Triclocarban, Undisclosed
synthetic fragrances (Products can be formulated with disclosed synthetic
fragrances that meet the following two criteria: (1) the synthetic fragrances
do not include any of the ingredients listed in numbers 1 through 12 above and
(2) the synthetic fragrances are at a concentration below 1% of the total
formula) The following type of acrylates: (ethyl acrylate, ethyl methacrylate,
methyl methacrylate, butyl methacrylate, hydroxypropyl methacrylate,
tetrahydrofurfuryl methacrylate, trimethylolpropane trimethacrylate , aluminum
salts), Animal Oils/Musks/Fats, Benzophenone + Related Compounds,
Butoxyethanol, Carbon Black, Lead/Lead Acetate, Methyl Cellosolve +
Methoxyethanol, Methylchloroisothiazolinone & Methylisothiazolinone,
Mercury + Mercury Compounds (Thimerisol), Insoluble Plastic Microbeads (This
prohibited ingredient applies to products that are meant to be rinsed off ),
Resorcinol, Talc (Talc that is free of any asbestos can be used in the
formulation provided that Brand conducts testing to ensure that talc is free of
any asbestos.), Toluene, Butylated hydroxyanisole (BHA), Butylated
hydroxytoluene (BHT) that is 0.1% or more of total formula, Ethanolamines
DEA/TEA/MEA/ETA, Nanoparticles as defined by the European Commission,
Petrolatum and Parrafin that is not USP grade, Phenoxyethanol that is 1% or
more of total formulation, Polyacrylamide & Acrylamide, The following types
of Styrene (Bromostyrene, Deastyrene/acrylates/dvbcopolymer, sodium
styrene/divinylbenzene copolymer , styrene oxide, styrene), 1,4 Dioxane in
final formulas must comply with the thresholds as follows: (10 or < ppm for
products that are meant to be rinsed off, wiped off or removed, 3ppm or <
for products that are meant to remain on the skin).