SEPHORA COLLECTION Clean Eye Mask

What it is: A bio-cellulose eye mask made from vegetal origin and formulated with 91 percent natural-origin ingredents that target specific under-eye concerns.

Skin Type: Normal, Dry, Combination, and Oily

Skincare Concerns: Dryness, Dullness, and Dark Circles

Formulation: Mask

Ingredient Callouts: This product is vegan.

What Else You Need to Know: These bio-cellulose eye patches are derived from fermented coconut water. Their ultra-thin, fast-absorbing fibers absorb three times more serum than a non-woven fiber and allow active ingredients to apply more evenly into the skin�all in as few as five minutes. The masks are bursting with vitamins and minerals, and super ingredients have been selected according to meet the needs of your skin as closely as possible.

Thanks to its vitamins and minerals content, the cucumber mask soothes and visibly depuffs while comforting delicate skin. The pomegranate mask�s vitamins fight the look of fatigue and dark circles. The caffeine mask smooths and energizes the look of skin thanks to extractions from green coffee beans. With its content of water, vitamins, and minerals, the watermelon mask hydrates and helps skin glow.

Clean at Sephora
Clean at Sephora is formulated without a list of over 50 ingredients, including sulfates (SLS and SLES), parabens, phthalates, and more. For the full list, check out the Ingredients tab.

Suggested Usage:
-Remove one protective film.
-Place the patch under the eye.
-Remove the two other films and place the second patch.
-Leave on for five minutes, then remove and massage any excess product into the skin.
-No need to rinse. -

Size:
1 Mask

Ingredients:
Aqua (Water), Butylene Glycol, Glycerin, Polyglyceryl-10 Laurate, 1,2-Hexanediol, Hydroxyacetophenone, Lecithin, Sodium Polyacrylate, Citrullus Lanatus (Watermelon) Fruit Extract, Glycosyl Trehalose, Parfum (Fragrance), Xanthan Gum, Hydrogenated Starch Hydrolysate, Sorbitan Caprylate, Cucumis Sativus (Cucumber) Fruit Extract, Passiflora Edulis Fruit Extract, Phenoxyethanol, CI 19140 (Yellow 5), CI 42090 (Blue 1), Potassium Sorbate, Sodium Benzoate, CI 16035 (Red 40).

Clean at Sephora products are formulated without:
Sulfates�SLS + SLES, Parabens, Formaldehydes, Formaldehyde-releasing agents, Phthalates, Mineral Oil, Retinyl Palmitate, Oxybenzone, Coal Tar, Hydroquinone, Triclosan, Triclocarban, Undisclosed synthetic fragrances (Products can be formulated with disclosed synthetic fragrances that meet the following two criteria: (1) the synthetic fragrances do not include any of the ingredients listed in numbers 1 through 12 above and (2) the synthetic fragrances are at a concentration below 1% of the total formula) The following type of acrylates: (ethyl acrylate, ethyl methacrylate, methyl methacrylate, butyl methacrylate, hydroxypropyl methacrylate, tetrahydrofurfuryl methacrylate, trimethylolpropane trimethacrylate , aluminum salts), Animal Oils/Musks/Fats, Benzophenone + Related Compounds, Butoxyethanol, Carbon Black, Lead/Lead Acetate, Methyl Cellosolve + Methoxyethanol, Methylchloroisothiazolinone & Methylisothiazolinone, Mercury + Mercury Compounds (Thimerisol), Insoluble Plastic Microbeads (This prohibited ingredient applies to products that are meant to be rinsed off ), Resorcinol, Talc (Talc that is free of any asbestos can be used in the formulation provided that Brand conducts testing to ensure that talc is free of any asbestos.), Toluene, Butylated hydroxyanisole (BHA), Butylated hydroxytoluene (BHT) that is 0.1% or more of total formula, Ethanolamines DEA/TEA/MEA/ETA, Nanoparticles as defined by the European Commission, Petrolatum and Parrafin that is not USP grade, Phenoxyethanol that is 1% or more of total formulation, Polyacrylamide & Acrylamide, The following types of Styrene (Bromostyrene, Deastyrene/acrylates/dvbcopolymer, sodium styrene/divinylbenzene copolymer , styrene oxide, styrene), 1,4 Dioxane in final formulas must comply with the thresholds as follows: (10 or < ppm for products that are meant to be rinsed off, wiped off or removed, 3ppm or < for products that are meant to remain on the skin).

Clean at Sephora
Clean at Sephora is formulated without a list of over 50
ingredients, including sulfates (SLS and SLES), parabens, phthalates, and more.
For the full list, check out the Ingredients below.

Clean at Sephora products are formulated without:
Sulfates—SLS + SLES, Parabens, Formaldehydes,
Formaldehyde-releasing agents, Phthalates, Mineral Oil, Retinyl Palmitate,
Oxybenzone, Coal Tar, Hydroquinone, Triclosan, Triclocarban, Undisclosed
synthetic fragrances (Products can be formulated with disclosed synthetic
fragrances that meet the following two criteria: (1) the synthetic fragrances
do not include any of the ingredients listed in numbers 1 through 12 above and
(2) the synthetic fragrances are at a concentration below 1% of the total
formula) The following type of acrylates: (ethyl acrylate, ethyl methacrylate,
methyl methacrylate, butyl methacrylate, hydroxypropyl methacrylate,
tetrahydrofurfuryl methacrylate, trimethylolpropane trimethacrylate , aluminum
salts), Animal Oils/Musks/Fats, Benzophenone + Related Compounds,
Butoxyethanol, Carbon Black, Lead/Lead Acetate, Methyl Cellosolve +
Methoxyethanol, Methylchloroisothiazolinone & Methylisothiazolinone,
Mercury + Mercury Compounds (Thimerisol), Insoluble Plastic Microbeads (This
prohibited ingredient applies to products that are meant to be rinsed off ),
Resorcinol, Talc (Talc that is free of any asbestos can be used in the
formulation provided that Brand conducts testing to ensure that talc is free of
any asbestos.), Toluene, Butylated hydroxyanisole (BHA), Butylated
hydroxytoluene (BHT) that is 0.1% or more of total formula, Ethanolamines
DEA/TEA/MEA/ETA, Nanoparticles as defined by the European Commission,
Petrolatum and Parrafin that is not USP grade, Phenoxyethanol that is 1% or
more of total formulation, Polyacrylamide & Acrylamide, The following types
of Styrene (Bromostyrene, Deastyrene/acrylates/dvbcopolymer, sodium
styrene/divinylbenzene copolymer , styrene oxide, styrene), 1,4 Dioxane in
final formulas must comply with the thresholds as follows: (10 or < ppm for
products that are meant to be rinsed off, wiped off or removed, 3ppm or < for
products that are meant to remain on the skin).