Sobel Skincare RX 30% Glycolic Acid Peel

Shop All Sobel Skincare Rx

4545654

Sobel Skincare RX 30% Glycolic Acid Peel

Sobel Skincare RX 30% Glycolic Acid Peel

    Product Description

    What it is: A pro-level peel, with 30-percent glycolic acid, that diminishes the look of dry surface cells, helps even skin tone, and minimizes the appearance of enlarged pores.

    Skin Type: Normal, Dry, Combination, and Oily

    Skincare Concerns: Dullness and Uneven Texture, Fine Lines and Wrinkles, and Pores

    Formulation: Lightweight Liquid

    Highlighted Ingredients:
    - AHA/Glycolic Acid: Exfoliates skin and treats enlarged pores.
    - Calendula: Calms skin.
    - Chamomile and Cucumber Extract: Help to soothe irritation.

    Ingredient Callouts: This product is cruelty-free and comes in recyclable packaging.

    What Else You Need to Know: This innovative dermatologist-developed facial peel powered by 30-percent glycolic acid provides the benefits of an in-office peel without the downtime. This intensive peel diminishes the look of dry, dull surface skin cells to reveal radiant, smooth, younger-looking skin. This peel also helps minimize the appearance of enlarged pores.

    Clean at Sephora
    Clean at Sephora is formulated without a list of over 50 ingredients, including sulfates (SLS and SLES), parabens, phthalates, and more. For the full list, check out the Ingredients tab.

    Suggested Usage:
    -Moisten cotton pad with peel.
    -Wipe over clean, dry skin.
    -Avoid eye area.
    -Leave on for two minutes.
    -Rinse thoroughly with lukewarm water.
    -Follow with cool water.
    -For normal to dry skin, use up to one time per week. Combination to oily skin, use up to two time per week.
    -Not intended for sensitive skin.
    -For optimal results follow with Sobel Skin Rx Bio Hyaluronic Moisturizing Cream (sold separately).

    Precautions:
    -For external use only.
    -Do not use products containing alcohol.
    -Avoid contact with the eyes.
    -Make sure to use sunscreen.
    -If irritation occurs, discontinue use and consult a healthcare physician.-

    Size:
    4.4 oz/ 130 mL

    Ingredients:
    -AHA/Glycolic Acid: Exfoliates skin and treats enlarged pores.
    -Calendula: Calms skin.
    -Chamomile and Cucumber Extract: Help to soothe irritation.

    Clean at Sephora products are formulated without:
    Sulfates—SLS + SLES, Parabens, Formaldehydes, Formaldehyde-releasing agents, Phthalates, Mineral Oil, Retinyl Palmitate, Oxybenzone, Coal Tar, Hydroquinone, Triclosan, Triclocarban, Undisclosed synthetic fragrances (Products can be formulated with disclosed synthetic fragrances that meet the following two criteria: (1) the synthetic fragrances do not include any of the ingredients listed in numbers 1 through 12 above and (2) the synthetic fragrances are at a concentration below 1% of the total formula) The following type of acrylates: (ethyl acrylate, ethyl methacrylate, methyl methacrylate, butyl methacrylate, hydroxypropyl methacrylate, tetrahydrofurfuryl methacrylate, trimethylolpropane trimethacrylate , aluminum salts), Animal Oils/Musks/Fats, Benzophenone + Related Compounds, Butoxyethanol, Carbon Black, Lead/Lead Acetate, Methyl Cellosolve + Methoxyethanol, Methylchloroisothiazolinone & Methylisothiazolinone, Mercury + Mercury Compounds (Thimerisol), Insoluble Plastic Microbeads (This prohibited ingredient applies to products that are meant to be rinsed off ), Resorcinol, Talc (Talc that is free of any asbestos can be used in the formulation provided that Brand conducts testing to ensure that talc is free of any asbestos.), Toluene, Butylated hydroxyanisole (BHA), Butylated hydroxytoluene (BHT) that is 0.1% or more of total formula, Ethanolamines DEA/TEA/MEA/ETA, Nanoparticles as defined by the European Commission, Petrolatum and Parrafin that is not USP grade, Phenoxyethanol that is 1% or more of total formulation, Polyacrylamide & Acrylamide, The following types of Styrene (Bromostyrene, Deastyrene/acrylates/dvbcopolymer, sodium styrene/divinylbenzene copolymer , styrene oxide, styrene), 1,4 Dioxane in final formulas must comply with the thresholds as follows: (10 or < ppm for products that are meant to be rinsed off, wiped off or removed, 3ppm or < for products that are meant to remain on the skin).

    Clean at Sephora
    Clean at Sephora is formulated without a list of over 50
    ingredients, including sulfates (SLS and SLES), parabens, phthalates, and more.
    For the full list, check out the Ingredients below.

    Clean at Sephora products are formulated without:
    Sulfates—SLS + SLES, Parabens, Formaldehydes,
    Formaldehyde-releasing agents, Phthalates, Mineral Oil, Retinyl Palmitate,
    Oxybenzone, Coal Tar, Hydroquinone, Triclosan, Triclocarban, Undisclosed
    synthetic fragrances (Products can be formulated with disclosed synthetic
    fragrances that meet the following two criteria: (1) the synthetic fragrances
    do not include any of the ingredients listed in numbers 1 through 12 above and
    (2) the synthetic fragrances are at a concentration below 1% of the total
    formula) The following type of acrylates: (ethyl acrylate, ethyl methacrylate,
    methyl methacrylate, butyl methacrylate, hydroxypropyl methacrylate,
    tetrahydrofurfuryl methacrylate, trimethylolpropane trimethacrylate , aluminum
    salts), Animal Oils/Musks/Fats, Benzophenone + Related Compounds,
    Butoxyethanol, Carbon Black, Lead/Lead Acetate, Methyl Cellosolve +
    Methoxyethanol, Methylchloroisothiazolinone & Methylisothiazolinone,
    Mercury + Mercury Compounds (Thimerisol), Insoluble Plastic Microbeads (This
    prohibited ingredient applies to products that are meant to be rinsed off ),
    Resorcinol, Talc (Talc that is free of any asbestos can be used in the
    formulation provided that Brand conducts testing to ensure that talc is free of
    any asbestos.), Toluene, Butylated hydroxyanisole (BHA), Butylated
    hydroxytoluene (BHT) that is 0.1% or more of total formula, Ethanolamines
    DEA/TEA/MEA/ETA, Nanoparticles as defined by the European Commission,
    Petrolatum and Parrafin that is not USP grade, Phenoxyethanol that is 1% or
    more of total formulation, Polyacrylamide & Acrylamide, The following types
    of Styrene (Bromostyrene, Deastyrene/acrylates/dvbcopolymer, sodium
    styrene/divinylbenzene copolymer , styrene oxide, styrene), 1,4 Dioxane in
    final formulas must comply with the thresholds as follows: (10 or < ppm for
    products that are meant to be rinsed off, wiped off or removed, 3ppm or < for
    products that are meant to remain on the skin).  

       

    Shipping & Returns

    • Convenient Shipping Options

      Not available at your store? We can ship to you directly or to your favorite JCP location.

    • Easy Returns

      Shop with confidence. Read our full, common sense

    Customer Reviews

    Sorry! We’re having a problem playing this video.